AMBSC Code Part 1 (Index Only)

AMBSC Code Part 1 (Index Only)

Australian Miniature Boiler Safety Committee

Issue 8-2012 Copper Boilers



Section 1 General Requirements
1.1 Scope
1.2 Purpose
1.3 Definitions

Section 2 Material
2.1 General
2.2 Copper
2.3 Brazing Alloys
2.4 Bronze and Gunmetal
2.5 Cupro-Nickel
2.6 Caulking Materials

Section 3 Design
3.1 Compliance
3.2 Design Approval
3.3 Barrels, Shells and Plates
3.4 Stayed Flat Surfaces
3.5 Flanged Plates
3.6 Doubling Plates for Stayed Areas
3.7 Torispherical Ends
3.8 Combustion Chambers
3.9 Circular Fireboxes
3.10 Tubes and Flues
3.11 Firebox Water Spaces
3.12 Tubeplates
3.13 Bushes and Mountings
3.14 Domes
3.15 Superheaters

Section 4 Construction
4.1 General
4.2 Joint Design
4.3 Silver Brazing, Bronze Brazing and GTAW Welding

Section 5 Fittings
5.1 Safety Valves
5.2 Pressure Gauge
5.3 Water Gauges
5.4 Feedwater Systems
5.5 Blowdown Valves
5.6 Washout Plugs
5.7 Fusible Plugs
5.8 Valves

Section 6 Support
6.1 Boiler Support Methods

Section 7 Inspection and Testing
7.1 Inspection
7.2 Testing
7.3 Retesting
7.4 Rejection

Section 8 Imported boilers

Section 9 Operations
9.1 Water Quality
9.2 Water Level
9.3 Raising Steam
9.4 Loss of Water or Other Incidents
9.5 Shutting Down

Section 10 Administration
10.1 Registration of New Clubs or Societies
10.2 Winding Up
10.3 Change of Ownership or Disposal of a Boiler or Air Receiver

Appendix 1
AMBSC Boiler Inspector Qualifications

Appendix 2
Examples of AMBSC Forms

Appendix 3
AMBSC Registered Socities

Appendix 4
Typical Design Submission Requirements for Regulatory Authority Design Approval

Appendix 5
Advanced Design Techniques
Reinforcement of Openings in Cylindrical Shells
Reinforcement of Tube Holes in Cylindrical Shells
Design of Rod Stays in Irregular Patterns
Calculating Loads on Regulator Stays

Appendix 6
Templates for Torispherical Ends

Total 68 pages (including covers)

© The Boiler Codes are Copyright. All Rights Reserved. No part of this publication may be reproduced, copied, lent or resold without prior permission of the publisher.

If you would like to purchase a copy of this code, please contact the Treasurer, AALS. Telephone, and email details for the Treasurer are on the Contacts Page.